The Stannah Stair Lift: This is a UK stair lift manufacturer that now exports to over 40 countries. Quite simply, Stannah stair lifts are the best on the market. Stannah make both straight and curved stair lifts. The Stannah 120 stair lift has two models; the Solus (a very contemporary design) and the Sofia (for those who prefer a more traditional look). With a Stannah home stair lift you get many features as standard but the company also offers optional features that other manufacturers don’t. Stannah stair lifts aren’t the cheapest on the market, but it makes the best handicap stair lifts.
The Summit Stair Lift: This is a low cost home stair lift. The company only makes straight stair lifts. The Summit chair lift is made to be a no-frills but reliable handicap stair lift. It uses technology that is now considered old-fashioned by most leading stair lift manufacturers; it uses a cable system rather than rack and pinion to drag the chair along the track, and the Summit stair lift is mains powered rather than battery powered. Other manufacturers switched to rack and pinion battery powered stair lifts because they give a smoother ride. You do get basic safety systems with the Summit stair lift such as a sensor on the footrest to detect obstacles, a seat belt and cable tensioning. Won’t you won’t get the more sophisticated safety features offered by other manufacturers. All in all, the Summit stair lift is for those on a small budget.
How does it work? The adjustable stair brackets are positioned on two 2x6’s -using a reusable spacing tool. The spacer is set using a chart which will give the exact setting for the rise and tread required for your project. Two screws are set in each bracket, attaching to the two 2x6’s. This forms a fully adjustable stringer which is then adjusted exactly to your stair requirements. Fixing screws are then inserted to lock the brackets in position. Two to three cuts total, top and bottom completes the stringer. Compared this to the dozens of cuts required for traditional construction. With this system, stairs can be built up to nine feet wide, using only the two outside stringers....no interior stringers required.
How is this possible with only two stringers? The adjustable brackets are ICC/ES tested and approved as joist hangers. The risers are made structural (2x8’s), attaching to the brackets and spanning across the stair like load bearing joists. This structurally superior system has been tested with breaking strains in excess of 1,200 lbs. per sq. ft. Once the risers and treads are attached, your stair is complete. The result will be a stair that is accurate, extremely strong and "you built that stair".
Copyright © 2018 montlaker.com.
All contents published under GNU General Public License. All rights of images and videos found in this site reserved by its respective owners. All trademarks mentioned belong to their owners, third party brands, product names, trade names, corporate names and company names mentioned may be trademarks of their respective owners or registered trademarks of other companies and are used for purposes of explanation and to the owner’s benefit, without implying a violation of copyright law.