Published at Thursday, July 05th 2018, 08:52:57 AM by Marie Sankt Sankt. Stair
How does it work? The adjustable stair brackets are positioned on two 2x6’s -using a reusable spacing tool. The spacer is set using a chart which will give the exact setting for the rise and tread required for your project. Two screws are set in each bracket, attaching to the two 2x6’s. This forms a fully adjustable stringer which is then adjusted exactly to your stair requirements. Fixing screws are then inserted to lock the brackets in position. Two to three cuts total, top and bottom completes the stringer. Compared this to the dozens of cuts required for traditional construction. With this system, stairs can be built up to nine feet wide, using only the two outside stringers....no interior stringers required.
Other codes address "rail post support" safety. A rail post per code regulations is required to support a lateral load of 200 lbs. This is a poorly enforced area of the code and with many inspectors content with the bump test. If it doesn’t move too much when they bump it with their hip, the rail will pass inspection. Many rail posts are simply lagged or nailed to the rim joists and post which are mounted directly to the deck surface will simply not meet code. The tragedy is, there are systems available on the market that correctly address this problem. Simpson, USP and Deck-Loc have brackets which will meet code for rim joist attachment but there’s only one adjustable bracket system (discussed below) which will meet code for wood or composite stairs.
Copyright © 2018 montlaker.com.
All contents published under GNU General Public License. All rights of images and videos found in this site reserved by its respective owners. All trademarks mentioned belong to their owners, third party brands, product names, trade names, corporate names and company names mentioned may be trademarks of their respective owners or registered trademarks of other companies and are used for purposes of explanation and to the owner’s benefit, without implying a violation of copyright law.