Published at Thursday, July 05th 2018, 07:59:06 AM by Christine Fink. Stair
How does it work? The adjustable stair brackets are positioned on two 2x6’s -using a reusable spacing tool. The spacer is set using a chart which will give the exact setting for the rise and tread required for your project. Two screws are set in each bracket, attaching to the two 2x6’s. This forms a fully adjustable stringer which is then adjusted exactly to your stair requirements. Fixing screws are then inserted to lock the brackets in position. Two to three cuts total, top and bottom completes the stringer. Compared this to the dozens of cuts required for traditional construction. With this system, stairs can be built up to nine feet wide, using only the two outside stringers....no interior stringers required.
Over the past several years, much has been done to address deck and stair safety issues, but we still have a long way to go. One glaring example of the failure in deck and stair safety protocol is the industry standard of permitting "hot dipped galvanized" anchors, screws, hangers and other hardware to be in direct contact with ACQ, pressure treated wood. The galvanic corrosion created between the high copper content of the wood and the galvanizing is so severe that the normal industry standard of G90 galvanizing will corrode in as little as 12 months and G185, such as Z-Max® can be gone in 24 months. The industry (including code officials) has adopted G185 as a fall back position with no engineering testing available to substantiate the validity or longevity of this adoption...this is a "knee jerk" reaction and is an accident waiting to happen. Without a barrier between the pressure treated wood and galvanized hardware, serious corrosion is inevitable.
Copyright © 2018 montlaker.com.
All contents published under GNU General Public License. All rights of images and videos found in this site reserved by its respective owners. All trademarks mentioned belong to their owners, third party brands, product names, trade names, corporate names and company names mentioned may be trademarks of their respective owners or registered trademarks of other companies and are used for purposes of explanation and to the owner’s benefit, without implying a violation of copyright law.